What pedal stacks well with the bk butler tube driver

Using the 1N5817 diodes shown should give you around +/-17V, but ifДЄn effect calls for +/-15V then you could always opt for using 1N4001 diodes Encontrars artculos nuevos o usados en Pedales de distorsin y Overdrive guitarra en eBay. The other models, esp Tube Works, are a different circuit and, IMO, not as dynamic or clear. The LT1054's oscillator typically runs at 25kHz. En eBay encuentras fabulosas ofertas en Pedales de distorsin y Overdrive guitarra. Models: there are many versions out there but the best ones are the BK/Chandler branded walwart ones, the 911 version (current) and, IMO, the dual-branded BK/Chandler Rack Version with middle, bias and contours. If you do want to try the ICL7660S then it may be worth omitting the cut between pins 1 and 8 to enable the frequency boost so you don't get noise. The schematic called for LT1054 which are more expensive, but I only paid about ВЈ5 for 5 on eBay a while ago and so they can still be had for a reasonable price without being fleeced too much. I don't know if this will work with our more commonly used ICL7660S although the pinout does appear to be the same. The board is rounded out with a recent issue BK Butler Tube Driver, a JAM Pedals Delay Llama+ modified with an on/off instead of hold switch and tap tempo, and a Boss TU-3, which he also uses as a mute switch when switching guitars.

I've done this with a particular layout in mind, but I think it may come in handy for a few effects that require +/- supplies, which can now be accommodated with a small daughterboard. This will be a useful little circuit for anyone wanting voltage doubling and negative voltage from a single charge pump.

What pedal stacks well with the bk butler tube driver